[section_title title=Closer Look Exterior]Closer Look Exterior
Starting off with the front of the case and as mentioned it has a nice red,white and blue theme to it. Â AeroCool really have done a nice job with all of their Avenger themed cases and this one is no exception, top job.
Aside from the amazing design job, AeroCool has also made this a great functional case and as such have added a nice front IO to it. The front IO consists of a nice big power button, 2 x fans controllers, 2 x USB3.0 ports and the front audio jacks (mic/headphone).
The main side panel has a nice window on the top to allow users to go ahead and show off the hardware inside. As the bottom will mostly be storage for the PSU, hard drives and cables, AeroCool have made the wise decision of not including a window on the bottom.
The other side panel is rather plain as we would expect, except for the vented area of the PSU intake fan which also has a nice dust filter on the inside.
  
The top of the XPredator cube case has a unique design to it, the fins on the top can actually be opened or closed a little bit by using the switch on the right in the photo. Opening up the fins should allow for a bit more ventilation and airflow when needed during those long gaming sessions we all like to enjoy when we can.
On to the back of the case and we can see room for 2 x fans, either 120mm or 140mm and 1 x 140mm pre-installed in the bottom. There are also 2 x holes for water cooling tubes which are right above the 4 x PCI expansion bays.
On the bottom are 4 x feet to help keep the case off the ground but these can of course be removed if need be.
