[section_title title=”Closer Look – Interior”]Closer Look –Â Interior
Looking on the inside and it looks like a fairly standard case, which isn’t all bad especially as it is budget orientated. There is a nice sized cutout in the motherboard tray that should hopefully allow for easy CPU cooler installation once the motherboard is already installed, there are 4x cable management cutouts and while they are small, they should hopefully get the job done.
The 5.25″ optical drive bays feature a tool-less design for easy installation.
Under the 5.25″ bays is a uniquely designed bracket that will allow for users to install either 2x 3.5″ hard drives or 1x 2.5″ hard drive.
Below the unique hard drive bracket is a more familiar hard drive cage that will again allow users to install 2x 3.5″ hard drives or 1x 2.5″ hard drive.
As mentioned the vented area for the bottom mounted PSU comes with a dust filter and while it may not be the best, it will surely get the job done.
Taking a look at the backside of the motherboard tray and there is not much going on. However, if you look closely you will notice the clips to attached zip ties to so users can route their cables as needed, as you can see there is a definite flow of direction to these.
