[section_title title=Installation]Installation
Installation is easy with the help of our five point mounting hardware. First we need to put the backplate on, to do so match it up with the corresponding letter hole to match your motherboard.
Once that is done, flip the board over and put the Intel mounting bars on and use the thumb screws to hold them down securely.
Next we set the heatsink on top of the mounting bars, in doing so we need to lineup the retention screws of the heatsink up with the holes in the middle of the mounting bars. Please make sure your RAM is compatible with the height of this cooler because as you can see in the pic below, mine is not 100% compatible.
Lastly we can attach our fan to the top via the four included screws and plug it into our CPU Fan header on our motherboard.
