[section_title title=”Installation”]Installation
Installing the Themis was simple enough, nothing major. The first thing I did was place the back plate on the back of the motherboard and use the 4x Knurled threaded screws provided to put into the holes, while we are fiddling with that we also need to tighten the other side with the 4xPlastic nuts.
After we finally manage to tighten the plastic nuts we then move onto the mounting clips, we are provided with Intel and AMD but today we only need the mounting clips for Intel, we slide the mounting clips over the screws till they reach the plastic nut at the bottom, once finished we then have to use the 4x Metal nut to keep the mounting clips on.
Once we are happy that the mounting clips are not going anywhere we move on to mounting the heat-sink itself, using the themal grease we place a small amount on the copper base and place it straight on top of the processor, then using the crossbar provided we align the Heat-sink and screw the crossbar in place.
 
Last but not least we mount the fan, definitely an easy job fitting the 4x anti vibration rubber in each corner of the fins, then pushing the fan into place.
