Thermalright True Spirit 140 BW Rev.A Review

2

Installation

If you have ever installed a Thermalright cooler, you have nothing to fear and if not, it is still a very straight forward process.

For testing purposes, I have installed this on the 1150 socket. To get things started you will want to get the backplate and line up the protective covering on top of it, next you will take the correct screws and push them through the holes in each corner, lining up with the correct position depending on your socket type. Once you have done that you can secure the screws in place with the white nylon washers.

Thermalright True Spirit 140 BW Rev.A_2

Once you have the backplate assembled so to speak you can go ahead and push the screws on it through the back of the motherboard out through the front and secure it in place with the appropriate thumbscrews.

Thermalright True Spirit 140 BW 1

Once you’ve screwed all the thumbscrews tight it is time to get the front plate into position. To do so, all you have to do is set it atop the thumbscrews you just put on and fasten it down with the included screws.

Thermalright True Spirit 140 BW Rev.A_13

Now that the front plate is in place, it’s time to get the cooler fully installed. Go ahead and get your thermal paste applied using your preferred method, put the cross plate across the top of the contact plate on the cooler then set it atop the CPU and fasten the screws through either side of the cross plate to the front plate.

Thermalright True Spirit 140 BW 2

 

2 COMMENTS

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.