BitFenix Enso Feature

Overclockers UK

Same award-winningĀ design – now availableĀ with aĀ meshĀ front!

Originally released this time last year, the BitFenix ENSO was dubbed an extremely stylish midi tower offering both tempered glass and fully integrated addressable RGB lighting at a fantastic price point. It’s now back,Ā with aĀ fully redesigned MESH front panel and with increased fan capacity.

The new MESH panel is perfect for builds featuring overclocked componentsĀ which demand additional cooling support,Ā but without the need to compromise on the sleek design. Featuring a quick release mechanism and magnetic lock, it’s also hassle-free to keep clean.

Avaliable for pre-order at Overclockers UK from Ā£84.95

BitFenix ENSO MESH at a glance:
  • Vastly Improved airflow withĀ new mesh frontĀ  panel and increased front fan capacity
  • Built-in ASUS Aura Sync Compatible Addressable RGB lighting and controller
  • Two pre-installed 120mm fans, with options for a maximum of 3 x 120mm/2 x 140mm front fans, 2 x 120mm top fans and 1 x 120mm rear fan.
  • Option for water-cooling configurations with front support for 1 x 240/280/360mm radiator and an additional 1 x 120mm rear mounted.
  • Room for up to 2 x 3.5″ HDD drives in the HDD caddy located beneath the PSU shroud, with an additional 3 x 2.5″ mounts located behind the motherboard tray.
  • Easy maintenanceĀ with quick release magnetic locks for both the top and mesh panels, with a sliderĀ located at the side of the case for the PSU filter.
  • Front I/O includes 2 x USB 3.0, 1 X HD Audio/Mic and 1 x RGB controls
  • Available in both black and white

Easy to access, install and upgrade components
The ENSO Mesh comes with a 4mm tempered glass side panel, secured by easily removed thumb-screws. The interior offers compatibility with Mini-ITX up to E-ATX format motherboards, with ASUS Aura sync compatibleĀ controller support for the latest 3 pin addressable RGB motherboards.

When it comes to components, the ENSO Mesh can fit a full length 340mm graphics card, with CPU cooler clearance of up to 160mm. There’s also built in cable management, with rubber grommets to ensure a clean build.

Air and water-cooling configurations

In terms ofĀ air cooling,Ā the BitFenix ENSO comesĀ pre-installed withĀ 1 x 120mm black fanĀ atĀ the front and an additional 1 x 120mmĀ RGB static at theĀ back of the case. It’s got configurable options for up to a maximum of 6 x 120mm fans including:

Front fan mountĀ – 3 x 120mm/ 2 x 140mm
Top fan mountĀ  Ā  – 2 x 120mm
Rear fan mountĀ  – 1 x 120mm

There’s easy access to clean the magnetic mesh filters, located at theĀ front and top of the case, with an additional PSU mesh filter easily accessed from the slider located on the right hand side of the case.
When looking at water-cooling options, the BitFenix ENSO Mesh offers two mounts for up to a maximum of 1 xĀ 360mm front radiator (35mm) and 1 x 120mm rear radiator.

Connectivity and Storage Solutions

The BitFenix Enso has a HDD tray located beneath the PSU shroud with capacity for 2 x 3.5″/2.5″ drives, with mounting points for an additional 3 x 2.5″ drives concealed just behind the motherboard tray.

The front I/O comes with 2 x USB 3.0, 1 x HD Audio ports and and RGB controller that lets you cycle between a variety of pre-set modes for the front lighting with options for manual control via compatible RGB motherboards.

Avaliable for pre-order at Overclockers UK from Ā£84.95

BitFenix ENSO MESH Technical Specifications:

  • Dimensions: 210 x 489 x 452Ā mm (W x H x D)
  • Material: Steel, plastic, tempered glass
  • Weight: approx. 7 kg
  • Color: Black or White
  • Form Factor: E-ATX, ATX, Micro-ATX, Mini-ITX up to 272mm
  • Maximum Fan Configuration:
    3x 120/ 2 x 140 mm (front)
    2x 120 mm (top)
    1x 120 mm (back)
  • Pre-Installed fans:
    1x 120 mm black (front side)
    1x 120 mm static RGB (back)
  • Radiator Mountings:
    1x 360mm/280 mm/240 mm (front)
    1x 120 mm (back)
  • Filter: Lid, front side, PSU
  • Drive Bays:
  • 2x 3.5/2.5 inch (internal)
  • 3x 2.5 inch (internal)
  • Power Supply: 1x standard ATX up to 160 mm (optional)
  • Expansion Slots: 7
  • I/O Panel:
    2x USB 3.0 (internal connection)
    1x per audio In/Out
  • Maximum GPU Length: 340 mm
  • Maximum CPU Cooler Height: 160 mm
  • Connectors RGB Controller:
    1x 4-pin RGB
    2x 3-pin RGB
    1x Front button
    1x SATA power cable

71adc5c3-2d13-4348-8ebe-e1d82e8b1ca6.png
Overclockers UK offers only the best in hardware components and systems. With a close relationship to all major brands in the industry, Overclockers UK manages to offer unique, finely tuned hardware-bundles along with immediate availability of the hottest components to its UK customers. With an extensive range of fully customisable systems, Overclockers UK are able to utilise their extensive know-how of the market and products, to create the fastest high performance systems geared toward the enthusiast user. Further information about Overclockers UK can be found here: www.overclockers.co.uk

Previous articleASUS ROG STRIX Z390-E Gaming Motherboard Review
Next articleLucidSound Starts Pre-Order Campaign for LS41 Wireless Surround Headset

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.