[section_title title=”Closer Look – Installation”]Â Closer Look – Installation
Installing my test hardware inside of the DS200 was really quite easy. Aerocool have designed the case for silence and ease of use. There is plenty of room for everything and plenty of ways to hide cables out of sight. The pre-installed motherboard risers and included zipties in the accessories box are just a few more ways Aerocool have tried to make your time building in the DS200 as enjoyable as possible. The only issue that I ran into when installing my hardware, which was more my fault than anything was the fact I had left the fan closest to the CPU installed on the H80i, this meant it was quite a pain to get the 8-pin CPU power connector plugged in. As said this is more my fault that anything but still something to take notice of.
Overall, the DS200 was a dream to build in and everything went smoothly. Let’s also remember I do not currently use a modular PSU for testing purposes and even as such I did not run into any problems, truly amazing. If you are looking for an easy installation the DS200 definitely offers one.
