[section_title title=”Installation”]Installation
Installation is an easy process when it comes to the LOKI II. First you will want to get backplate on the back of the motherboard and then use the corresponding screws and push them through the mount holes for your socket type in the backplate and through to the front of the motherboard.
Once the screws are through to the front, you can put a washer on each once then you can go ahead and tighten the thumb screw into place so to hold the backplate on.
Now that the backplate is on, we can get the cooler ready to be installed atop the CPU. To do so, all you need to do is get the corresponding arms, in my case Intel and screw them onto the cooler.
Once that is done you can put your desired thermal paste on and set the LOKI II on top of the CPU and use the last set up thumb screws to secure it to the rest of the mounting hardware.
