[section_title title=Installation]Installation
Installation was what you would expect from a case of this size, not exactly easy but not hard at the same time. Everything fits as it should just it’s very confined so unless you’re used to working in smaller cases it may take a bit of getting used to.
For the purpose of the below photos I left out the power supply and SSD bracket as with both of those in, you could hardly see anything else. To get everything installed inside the T60-SFX I went ahead and removed the SSD bracket first as while you could probably work around it, removing 4x screws to take it out is more than worth it.
Next up I put the motherboard risers in and got the motherboard installed, everything fit perfectly as you would hope. When it came time to install the graphics card I was confident it would fit but knew it would be a very close fit. For reference the GPU in the images below is an ASUS GTX 770 2GD5, according to the ID-COOLING specifications for the T60-SFX it can accommodate graphics cards up to 263mm in length so if you are looking into this case you may need to do a bit of research or measuring to see how long your current card is.
