[section_title title=”Closer Look”]Closer Look
Starting with the top of the cooler we can see the full aluminium cover which hosts a nice be quiet logo in the center and 14 aluminium heatpipe caps.
On the front is the 120mm SilentWings PWM fan that you can adjust the height on if needed.
Taking a look from the side we can now also see the second inner fan which is a 135mm SilentWings PWM fan. Also notice how easily the fans clip on and off the heatsink and how easy it would be to add a third if need be.
One of the things I found handy is not only has be quiet! included 2 fans, both with PWM connectors, they have taken the liberty of turning one of the fan connectors into a fan splitter so you can plug the 2nd fan into it and only use one motherboard fan header. Well done be quiet!
There is quite a bit of clearance under the Dark Rock Pro 3 for RAM but you may run into problems with some RAM that has bigger heatsinks attached.
