EK Water Blocks, Ljubljana based premium water cooling gear manufacturer, is proud to introduce the EK-FB ASUS M6E series Full-Board water block for ASUS® Maximus VI Extreme, a Z87 Express based premium 4th generation Intel® Core® LGA-1150 socket motherboard.
EK-FB ASUS M6E water block is a complete liquid cooling solution for ASUS Maximus VI Extreme motherboard. The water blocks directly cools Intel Z87 southbridge (PCH), PLX PEX 8474 PCIe lane splitter as well as power regulation (VRM / MOSFETs) module. It is a high flow water block that can be easily used with systems using weaker water pumps. Base of these water blocks are made of (nickel plated – depending on the model and variant) electrolytic copper while the top is made of quality POM Acetal material.
Thanks to the all-in-one design the whole cooling solution requires only two industry standard G1/4 fittings. The sealing is ensured by the use of quality rubber gaskets. The nickel plated brass screw-in standoffs are already pre-installed and allow for easy and trouble-free installation by utilizing both original motherboard backplates. The water block is available in four visually different versions:
||MSRP (incl. VAT)
|EK-FB ASUS M6E – Nickel||128,05€|
|EK-FB ASUS M6E – Acetal+Nickel||128,05€|
|EK-FB ASUS M6E – Nickel (Original CSQ)||128,05€|
|EK-FB ASUS M6E – Acetal+Nickel (Original CSQ)||128,05€|
– EK-FB ASUS M6E series water block
– mounting mechanism
– thermal pads
EK-FB ASUS M6E is readily available for purchase through EK Webshop and Partner Reseller Network
It appears that EK have chosen to move away from the CSQ design that has adorned a lot of their products recently.
I for one was quite keen on the CSQ design, but this new block looks gorgeous, what are your views on it?