The front IO panel is located on the top of the case and features a power button, audio jacks, 2x USB 2.0 and 2X USB 3.0 with Razers signature green ports!

The front panel is easily pulled off, though do be careful as there are a couple of wires connected to light up the triple headed snake logo on the front!

Taking off the front panel also allows access to the 3x included 120mm front intake fans which are placed just behind a nice dust filter that is held in place with magnets. Removing the dust filter to access the fans is easier than removing the front panel, which wasn’t very hard to begin with!

On the main side panel, there is very nicely sized and placed window that will allow users to look inside the case and see all the hardware on display.

One the back side we have the normal hosts of cutouts for all our components such as the motherboard, PSU and any PCI cards that will be used. One of my favourite features involves the switch up in the top left, once pushed, it turns on all the cases pre-installed LED’s. The LED’s are the front snake logo, the snake logo on the inside PSU cover, the bottom exterior LED’s and the two LED’s on the back that will help users plug in everything they need during those night time hours!

One the bottom there is a removable dust filter, as well as the 3 white areas which include LED’s to give the chassis a nice under glow!

Lighting

As mentioned, when using the button on the back, there are quite a few areas of this case that light up. While the LED’s may not help performance, there is no denying they look amazing and are tastefully done in this case!