[section_title title=Closer Look]Closer Look
Taking a look at the cooler from the top and we can notice two holes which lead to retention screws to secure the heatsink to the included mounting once installed on the motherboard. We also can notice a black frame around the top which houses four holes to screw the fan down, a white shroud that goes around the fins of the cooler and also the six heatpipes on the bottom.
Taking a look at the bottom we can see the baseplate and six heatpipes again. Notice how four go all the way through the baseplate and are U-shaped to offer better cooling performance.
On the side of the shroud that would go over RAM we have the Cryorig ‘CR’ logo which is not overdone and hardly noticeable which is warmly welcomed.