[section_title title=”Installation”]

Installation

The Patent Pending “Multiseg™” Quick Mount System is a great way to install the R1 universal on Intel sockets. To get things started take the base plate and in each corner move the piece to the desired location depending on your preferred socket type.

Cryorig R1 Universal_8

One you have the pegs adjusted to your socket type you should be able to push them through the back of the motherboard, after this you will use the correct thumbscrews to secure the backplate to the motherboard.

Cryorig R1 Universal_6

Once all four corners are secure it is now time to install the cooler retention brackets, do so place them on top of the previously installed thumbscrews, following directions to align them properly then secure them in place with the thumb caps as pictured.

Cryorig R1 Universal_4

Now that the bracket is installed it is time to apply thermal paste and then screw the cooler to the bracket using the included screwdriver that came in the box.

Cryorig H5 Installation

As mentioned the Cryorig H5 offers great compatibility with RAM and unless the heatsinks on your RAM are overly bulky, you should not run into any problems.

Cryorig H5 Installation_1

1
2
3
4
5
6
7
8
Previous articleMods to Watch – Gold Wings by Snef
Next article10TB Hardrives? Next we are going to have holodrives

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.