[section_title title=”Installation”]
Installation
As with most AIO coolers, installation is straight-forward and should only take most users a few minutes. Please note that I only cover installing the pump/plate onto the CPU and you may want to install the radiator into your case first in some scenarios.
To get things started, you will want to look in the installation guide to see which holes you will need to use for the long screws, once you have the screws in their desired holes, use the black clips to hold them into place.
Next, push the screws through the back off the motherboard and on the front side, push the washers down over the screws to hold the backplate in place. Once done, the mounting hardware is ready for the cooler to be attached.
Now it is time to set the pump/block atop the CPU and screw it into place in all four corners. That’s it, job done! You can now make use of your new Captain 240 AIO cooler.
In most cases, the Captain 240 should not interfere with the users RAM.
