[section_title title=”Packaging”]
Packaging
OKEANOS
Starting off with the packaging and REEVEN have done a great job of bringing the attention of anyone looking at it, right to the image of the cooler no matter which side of the box you may see first. Looking around the box and users will be able to see the OKEANOS cooler from various angles. All of the relevant information is also present, users will easily be able to find the compatible CPU socket types, information about the cooler, including its nickel plated heat pipes and also the dimensions of the cooler so they can make sure it will fit in their case.
The OKEANOS is well protected inside the box and in most cases should arrive at the end-user in perfect condition.
As for the contents of the box, we have the OKEANOS dual tower cooler, the 120mm and 140mm fans, fan retention clips for up to 3x fans, SSA cables that will provide a good balance between performance and silence and all of the hardware users will need to mount the cooler on the compatible AMD and INTEL sockets alongside the instructions to do so.
STEROPES
The box for the STEROPES follows the same design as that of the OKEANOS. Looking around the box, there are a few images of the cooler itself from various angles and all the relevant information to make sure this cooler is compatible and will fit where needed is also present.
Getting everything out of the box and REEVEN have taken the pleasure in already installing the fan onto the cooler, this is especially nice as you will not need to remove the fan to install the cooler onto your CPU. The STEROPES is quite easy to install and as such there is not as much mounting hardware required which is always nice though REEVEN have included everything needed to mount on all compatible CPU sockets.
