[section_title title=Closer Look – Interior Cont.]Closer Look – Interior Cont.
Moving onto the main chamber and this is of course where the motherboard, GPU, coolers and all of that fun stuff will go and if you have purchased the windowed version, be on display. You will also notice are a few cutouts with rubber grommets for cable routing and the motherboard risers come pre-installed.
As mentioned there would be ample room to add some fans or a radiator to the top of the W2, modders at the ready!
The 2 x included 140mm front intake fans, if you look through the cooler cutout in the motherboard tray you can see one connected to the fan controller on the rear of the case.
A look at the rear exhaust fan and also if you look through the cutout in the motherboard tray you will notice the 3.5″/5.25″ drive cage.
On the bottom of the case we have room for 2x 120mm fans or a 240mm radiator (dependent on motherbaord type). There is also a dust filter on the bottom of the case that is easily removed and cleaned.