[section_title title=”Specifications”]Specifications
|
SPECIFICATION
|
| Product Name |
AIDOS / AIDOS BLACK |
| Product Number |
OP105246 / 0R100009 |
| Dimension [WxDxH”] |
95x55x136 mm |
| Weight |
325 g [Heat Sink Only”] |
| Thermal Resistance |
0.127 °C/W |
| Heat Sink |
| Base Material |
CPU Direct Contact [C.D.C.”] |
| Fin Material |
Aluminum Alloy; Solder-less fins assembly |
|
| Heat-pipe |
|
| Fan |
| Dimension [WxHxD”] |
92x92x25 mm |
| Voltage Rating |
12V |
| Starting Voltage |
7V |
| Speed |
1000~2200 RPM [PWM controlled”] |
| Bearing Type |
Sleeve Bearing |
| Air Flow |
22.1~48.6 CFM |
| Air Pressure |
0.73~3.53 mmH2O |
| Life Expectance |
40,000 hrs |
| Noise Level |
28.87 dBA [Max.”] |
| Connector |
4 pin with PWM |
|
|
|
APPLICATION
|
| Intel® |
All Socket LGA 775/1150/1155/1156/1366/2011 CPU (Coreâ„¢ i3 / i5 / i7 CPU) |
| AMD® |
All FM2+/FM2/FM1/AM3+/AM3/AM2+/AM2 CPU |
[…] Metis Case M-ITX (Blue) Raijintek AIDOS CPU Cooler 2 x 30cm BitFenix Alchemy LED Strips (White) 2 x 120mm BitFenix Spectre Pro Fans (Red […]
Why is every single review for this cooler different? I have now come across 5 different reviews with 4 of them for certain using this same exact i7 4770k and 2 show pretty poos numbers with this being one of the two and the other two using the i7 and the third using a cpu I can’t think of atm showing performance that beats the hyper 212 evo in just about every area except a 1 degree loss with an overclock idle temp. I also seem to get conflicting opinions from people who have purchased this cooler pretty much matching the reviews. It either shows there is some variance in installation or the build quality of the cooler. Unfortunately I’m waiting for one in the mail and can’t even pawn it off to my son since he his cpu runs hotter then the skylake I planned to use it with. I wasn’t hoping for much but considering the low tdp of skylake expected to at least be able to safely overclock my i5 6400 to 4ghz but all these reviews makes me wonder.
Unfortunately without access to the same cooler we can’t re-run the tests to find out if it was a seating/fitting issue. I don’t think we would be able to find out if it’s a random problem across manufacturing without access to a large number of coolers and ran the tests again in lab conditions… something that simply isn’t possible for us to do.
TL:DR – Best of luck, hope you get a good one 🙂